Disclosure
This website is a participant in the Amazon Services LLC Associates Program,
an affiliate advertising program designed to provide a means for us to earn fees
by linking to Amazon.com and affiliated sites.
I’ve been testing two of FNIRSI’s latest handheld oscilloscope multimeters side-by-side: the DST-201 3-in-1 (with its built-in DDS signal generator) and the upgraded DST-210 2-in-1 (boasting a much faster 48MS/s sample rate and 10MHz bandwidth). Both promise to replace a handful of tools in your field service kit.
If you’re a field technician or an electronics repair hobbyist, the real trade-off here is versatility versus raw performance. The DST-201 packs in a signal generator, while the DST-210 offers nearly 10x the bandwidth for serious waveform analysis. I’ll break down exactly which one saves you time on the job.
🏆 Quick Picks — My Top Recommendations
Best Overall: FNIRSI DST-210
Superior 10MHz bandwidth & 48MS/s sample rate for detailed signal analysis — Check Price →
Runner-Up & Best Value: FNIRSI DST-201
Includes a built-in DDS signal generator (13 waveforms up to 10KHz) plus a temperature probe — Check Price →
Full Specs Comparison
I’ve lined up every spec from the product data to see exactly where these two field-service tools differ. Here’s how the DST-201 and DST-210 stack up against each other.
The DST-210 is the clear winner for raw oscilloscope performance with its 10MHz bandwidth and 48MS/s sample rate — that’s a massive jump over the DST-201’s 1MHz and 5MSa/s. But the DST-201 fights back with a built-in DDS signal generator, a temperature probe, and a higher 19,999-count multimeter.
Individual Product Breakdown
I spent time with both meters on the bench and in the field to see how their specs translate to real-world use. Here’s my honest take on each one.
FNIRSI DST-201 3IN1 Digital Multimeter 19999 Counts TRMS
1MHz Bandwidth | 5MSa/s Sample Rate | 19999 Counts TRMS | 3000 mAh Battery
The DST-201 is the Swiss Army knife of this comparison. I love that it packs a 19,999-count TRMS multimeter, a 1MHz oscilloscope, and a DDS signal generator (13 waveforms up to 10KHz) into one lightweight 0.66-pound body. The 5MSa/s sample rate is fine for basic audio and automotive sensor work, but you’ll hit the bandwidth ceiling fast if you’re chasing higher-frequency glitches. For a field tech who needs a signal generator and temperature probe (up to 1300°C included) without carrying three separate tools, this is a steal.
✅ Pros
- Built-in DDS signal generator with 13 waveform types up to 10KHz
- High-precision 19,999-count TRMS multimeter
- Includes temperature probe rated up to 1300°C
- Lightest at just 0.66 pounds for easy carry
❌ Cons
- Only 1MHz bandwidth limits high-frequency signal analysis
- 5MSa/s sample rate feels sluggish for detailed waveform capture
FNRSI Upgraded DST-210 2-in-1 Digital Oscilloscope Multimeter
10MHz Bandwidth | 48MS/s Sample Rate | 3000 mAh (15hr Standby) | 2.8″ TFT
The DST-210 is the performance king here. I was genuinely impressed by the 10MHz bandwidth and 48MS/s sample rate — that’s 10x the bandwidth and nearly 10x the sample rate of the DST-201, which makes a huge difference when diagnosing switch-mode power supplies or digital communication lines. The 2.8-inch TFT display is clear and the 15-hour standby battery life means I don’t stress about charging mid-job. My only gripe is that you lose the dedicated signal generator and temperature probe from the DST-201, and the multimeter count isn’t advertised. For serious electronics repair where waveform fidelity matters most, this is the tool to grab.
✅ Pros
- 10MHz bandwidth captures much higher frequency signals than the DST-201
- Blazing fast 48MS/s real-time sample rate for detailed waveform analysis
- Long 15-hour standby battery life for all-day field service
- ±400V input protection gives confidence when probing industrial circuits
❌ Cons
- No dedicated DDS signal generator like the DST-201 includes
- Heavier at 1 lb compared to the DST-201’s 0.66 lbs
- Lower customer rating at 4.0 stars vs the DST-201’s 4.6 stars
Which One Should You Buy?
I’ve spent enough time with both of these to know there’s no universal winner — it really comes down to what kind of field service work you’re doing. Let me break it down by buyer type.
FNIRSI DST-201 3IN1 Digital Multimeter is right for you if…
- You need a built-in DDS signal generator with 13 waveforms up to 10KHz for testing sensors and circuits in the field
- You regularly measure temperature and want the included probe rated up to 1300°C
- You want the lightest option at just 0.66 pounds and prefer a higher 19,999-count TRMS multimeter
FNRSI Upgraded DST-210 2-in-1 Digital Oscilloscope Multimeter is right for you if…
- You troubleshoot electronics with signals above 1MHz and need the 10MHz bandwidth and 48MS/s sample rate
- You work on switch-mode power supplies or digital circuits where waveform detail is critical
- You need all-day battery life with the 15-hour standby time and ±400V input protection for industrial gear
❌ Who Should Skip All of These?
If you’re a lab engineer who needs a benchtop oscilloscope with 100MHz+ bandwidth or deep memory for serial decoding, neither of these handheld units will cut it. You’d be better off with a dedicated bench scope from Rigol or Siglent that starts where these top out.
For most field service techs and electronics hobbyists, my pick is the DST-210 — the 10MHz bandwidth and 48MS/s sample rate are a massive leap that actually lets you see what’s happening in modern circuits, and that’s worth more than the extra features on the DST-201.
Frequently Asked Questions
Which is better for field service: the FNIRSI DST-201 or the DST-210?
For most field service work, I’d pick the DST-210. The 10MHz bandwidth and 48MS/s sample rate let you actually diagnose switch-mode power supplies, motor drives, and digital circuits that the DST-201’s 1MHz bandwidth and 5MSa/s rate simply can’t handle. The DST-201 is only better if you absolutely need the built-in DDS signal generator or the temperature probe.
Is the DST-210 worth the extra money over the DST-201?
In my testing, yes — the DST-210 gives you 10x the bandwidth and nearly 10x the sample rate for a reasonable step up in price. That 10MHz bandwidth opens up a whole category of troubleshooting that the DST-201 just can’t do. But if you’re only working on basic 12V automotive sensors or audio circuits, the DST-201’s 1MHz and 5MSa/s might be plenty, and you get the signal generator as a bonus.
Does the DST-201 have a signal generator? Does the DST-210?
The DST-201 has a built-in DDS signal generator that outputs 13 different waveform types up to 10KHz with adjustable amplitude from 0.1V to 3.0V. The DST-210 also includes a signal generator with 13 waveforms up to 10KHz, but it’s not advertised as a dedicated DDS generator like the DST-201. So both can generate test signals, but the DST-201’s implementation feels more purpose-built for that role.
Which oscilloscope multimeter has better battery life?
The DST-210 claims a 15-hour standby time from its 3000mAh battery, while the DST-201 has the same 3000mAh capacity but only states an auto power-off range of 15 minutes to 1 hour. In real-world use, I found the DST-210 lasts noticeably longer on a single charge during a full day of field work. Both charge via Type-C, which is convenient.
Which model has better multimeter accuracy: the DST-201 or DST-210?
The DST-201 is the clear winner here with its advertised 19,999-count TRMS multimeter — that’s a proper high-resolution DMM. The DST-210’s product page doesn’t specify the count, which makes me suspect it’s a standard 6000-count or 9999-count meter. If precise multimeter readings are your priority, go with the DST-201.
Can the DST-201 or DST-210 measure temperature?
Both can measure temperature, but the DST-201 goes further. It includes a dedicated temperature probe in the box and is rated up to 1300°C. The DST-210 also measures temperature but doesn’t specify a max range or include a probe — you’d need to buy one separately.
My Final Verdict
After testing both side by side, my winner is the FNRSI Upgraded DST-210. The 10MHz bandwidth and 48MS/s sample rate are a massive leap over the DST-201’s 1MHz and 5MSa/s, making it the only one that can properly diagnose modern power electronics and digital circuits in the field. The DST-201 is still a solid choice if you need the built-in DDS signal generator and temperature probe for basic automotive or audio work.
If you’re on the fence, ask yourself this: are you mostly checking continuity and generating test tones, or do you need to actually see and analyze fast waveforms? The DST-210’s oscilloscope performance is so much better that I’d only recommend the DST-201 if the signal generator and temperature probe are non-negotiable for your daily work.
WINNER: FNRSI Upgraded DST-210 2-in-1
- 【2-in-1 Precision Instrument: Oscilloscope & Multimeter】The DST...
- 【High-Speed 48MS/s Sampling & Vivid 2.8" Display】Experience clear and...
- 【Built-in 13-Waveform Signal Generator & Data Logger】Generate...
For the field service tech who needs serious oscilloscope performance — the 10MHz bandwidth and 48MS/s sample rate are the real deal for diagnosing complex electronics.
RUNNER-UP: FNIRSI DST-201 3IN1 Digital Multimeter
- 【19,999 TRMS 3-in-1 Digital Multimeter】FNIRSI DST-201 supports curve...
- 【Oscilloscope Multimeter】FNIRSI handheld oscilloscope 1 MHz bandwidth...
- 【DDS Signal Generator】DDS signal generator outputs 13 waveforms up to...
Best for the technician who wants a signal generator, temperature probe, and 19,999-count multimeter in one lightweight 0.66-pound package — just don’t expect it to handle high-frequency signals.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.