Disclosure
This website is a participant in the Amazon Services LLC Associates Program,
an affiliate advertising program designed to provide a means for us to earn fees
by linking to Amazon.com and affiliated sites.
If you’re a repair tech trying to decide between the FNIRSI DST-201 and the FNIRSI DST-210, you’re looking at two handheld oscilloscope multimeters that pack a ton of features into a small package. The DST-201 gives you a 3-in-1 tool with a 1MHz bandwidth, while the DST-210 steps things up with a much faster 48MS/s sampling rate and a 10MHz bandwidth.
This comparison is for anyone who needs to diagnose electronics, automotive systems, or circuit boards on the go without lugging around a benchtop scope. The real trade-off here is whether you need the faster sampling and higher bandwidth of the DST-210 or the extra DDS signal generator features of the DST-201. Stick with me and I’ll break down exactly which one fits your repair bench.
🏆 Quick Picks — My Top Recommendations
Best Overall: FNIRSI DST-210
Faster 48MS/s sampling and 10MHz bandwidth for serious electronics repair — Check Price →
Runner-Up: FNIRSI DST-201
3-in-1 design with a built-in DDS signal generator up to 10KHz and 13 waveforms — Check Price →
I’ve put the key specs side by side so you can see exactly how the DST-201 and DST-210 stack up against each other.
Full Specs Comparison
| Specification | FNIRSI DST-201 3IN1 Digit | FNRSI Upgraded DST-210 2- |
|---|---|---|
| Counts | ✅ 19999 | — |
| TRMS | ✅ Yes | — |
| Bandwidth | 1MHz | ✅ 10MHz |
| Sample Rate | 5MSa/s | ✅ 48MS/s |
| Display Type | — | ✅ 2.8″ Color TFT |
| Weight | ✅ 0.66 Pounds | — |
| Power Source | ✅ Battery Powered | — |
| Color | ✅ Black | — |
| Functions | ✅ 3-in-1 | 2-in-1 |
| Signal Generator | DDS Generator | ✅ Yes |
| Voltage Measurement | AC/DC | ✅ Yes |
| Current Measurement | ✅ Yes | ✅ Yes |
| Capacitance Measurement | ✅ Yes | ✅ Yes |
| Resistance Measurement | ✅ Yes | ✅ Yes |
| Temperature Measurement | ✅ Yes | ✅ Yes |
For me, the biggest difference is the DST-210’s 48MS/s sampling rate versus the DST-201’s 5MSa/s — that’s nearly 10 times faster for capturing signal details.
Individual Product Breakdown
I spent time digging through the specs and user feedback for both of these FNIRSI models to give you an honest look at what each one actually delivers on the bench.
FNIRSI DST-201 3IN1 Digital Multimeter 19999 Counts TRMS
1MHz Bandwidth | 5MSa/s Sample Rate | 3000mAh Battery | 0.66 lbs
- 【19,999 TRMS 3-in-1 Digital Multimeter】FNIRSI DST-201 supports curve...
- 【Oscilloscope Multimeter】FNIRSI handheld oscilloscope 1 MHz bandwidth...
- 【DDS Signal Generator】DDS signal generator outputs 13 waveforms up to...
The DST-201 is a true 3-in-1 tool that combines a 19999-count TRMS multimeter, a 1MHz oscilloscope, and a DDS signal generator that outputs 13 waveforms up to 10KHz. I love that it includes a temperature probe and live/neutral detection, making it a solid choice for automotive and field diagnostics. The 5MSa/s sample rate feels a bit slow for fast digital signals, so this is better suited for audio circuits, sensors, and general electrical troubleshooting rather than high-speed digital repair.
✅ Pros
- Built-in DDS generator with 13 waveform types up to 10KHz
- 3-in-1 functionality saves space and money
- Includes temperature probe and alligator clips out of the box
- Lightweight at just 0.66 pounds for easy portability
❌ Cons
- Only 5MSa/s sample rate limits high-speed signal capture
- 1MHz bandwidth is low for complex digital circuit analysis
FNRSI Upgraded DST-210 2-in-1 Digital Oscilloscope Multimeter
10MHz Bandwidth | 48MS/s Sampling Rate | 3000mAh Battery | 1 lb
- 【2-in-1 Precision Instrument: Oscilloscope & Multimeter】The DST...
- 【High-Speed 48MS/s Sampling & Vivid 2.8" Display】Experience clear and...
- 【Built-in 13-Waveform Signal Generator & Data Logger】Generate...
The DST-210 is the clear winner for repair techs who need to see fast signal details, thanks to its 48MS/s sampling rate and 10MHz analog bandwidth — both massive upgrades over the DST-201. I appreciate the 2.8-inch TFT display and the built-in signal generator with 13 waveform types, though it’s a 2-in-1 tool rather than a 3-in-1. The ±400V input protection gives me confidence when probing live circuits, and the 15-hour standby battery life means I can work all day without hunting for a charger.
✅ Pros
- 48MS/s real-time sampling captures fast digital signals clearly
- 10MHz bandwidth is 10 times wider than the DST-201
- Built-in data logger for diagnosing intermittent issues over time
- ±400V input protection for safe operation on live circuits
❌ Cons
- 2-in-1 design lacks the dedicated DDS generator of the DST-201
- Heavier at 1 pound compared to the DST-201’s 0.66 pounds
Which One Should You Buy?
I know picking between these two can feel tricky, but the right choice really comes down to what kind of signals you’re chasing and whether you need that extra signal generator. Let me break it down by who each tool actually fits.
FNRSI Upgraded DST-210 2-in-1 Digital Oscilloscope Multimeter is right for you if…
- You regularly troubleshoot digital circuits and need the 48MS/s sampling rate to see fast signal edges clearly
- You work with microcontrollers or communication signals that require the 10MHz bandwidth for accurate waveform capture
- You want a data logger to record and analyze intermittent faults over time during long diagnostics sessions
FNIRSI DST-201 3IN1 Digital Multimeter 19999 Counts TRMS is right for you if…
- You need a dedicated DDS signal generator that outputs 13 waveform types up to 10KHz for testing sensors and audio circuits
- You want a lightweight 0.66-pound tool for field service and automotive diagnostics where portability matters most
- You value the included temperature probe and live/neutral detection for electrical and HVAC troubleshooting
❌ Who Should Skip All of These?
If you’re doing serious benchtop work with high-speed digital signals above 10MHz or need advanced protocol decoding like I2C or SPI, skip these handheld units entirely and look for a full-featured benchtop oscilloscope with a much higher bandwidth and sample rate.
For most repair techs doing general electronics, automotive, or field diagnostics, I’d grab the DST-210 — that 48MS/s sampling rate and 10MHz bandwidth will save you headaches when you’re trying to catch glitchy waveforms that the DST-201 would simply miss.
Frequently Asked Questions
Which is better for electronics repair, the DST-201 or the DST-210?
For most electronics repair work, I’d pick the DST-210 hands down. Its 48MS/s sampling rate and 10MHz bandwidth let you actually see fast digital signals like PWM, clock lines, and serial data that the DST-201’s 5MSa/s and 1MHz bandwidth would completely miss. The DST-201 is fine for audio circuits and basic sensor checks, but if you’re troubleshooting microcontrollers or switching power supplies, the DST-210 is the only real choice here.
Is the DST-210 worth the extra money over the DST-201?
In my opinion, yes — especially if you work with anything beyond basic DC circuits. The DST-210 gives you 10 times the bandwidth and nearly 10 times the sampling rate of the DST-201, which is a massive jump in capability for capturing real-world signals. You do lose the dedicated DDS generator that the DST-201 has, but the DST-210 still includes a built-in signal generator with 13 waveform types, so you’re not missing much.
Does the DST-201 have a built-in signal generator?
Yes, it does — and this is actually one of the DST-201’s strongest features. It includes a DDS signal generator that outputs 13 different waveform types up to 10KHz with an adjustable amplitude range from 0.1V to 3.0V. The DST-210 also has a signal generator with the same 13 waveform types up to 10KHz, but the DST-201’s generator is a more dedicated 3-in-1 implementation that feels more natural to use for waveform simulation.
Which one is more portable for field work?
The DST-201 wins on portability since it weighs just 0.66 pounds compared to the DST-210’s 1 pound, and both have the same 3000mAh rechargeable battery with Type-C charging. That said, the DST-210 still fits in a tool bag easily and claims 15 hours of standby time, so both are perfectly fine for field diagnostics. If every ounce matters in your service kit, go with the lighter DST-201.
Can the DST-201 measure temperature?
Yes, it can — the DST-201 includes a temperature probe right in the box and supports an upper temperature rating of 1300 Degrees Celsius. This makes it a great option for HVAC work, appliance repair, or automotive diagnostics where you need to check thermocouples or engine temps. The DST-210 also measures temperature, but you’ll want to confirm whether the probe is included or sold separately.
Which one has better customer reviews?
The DST-201 has a significantly stronger reputation with a 4.6 out of 5 stars rating from 90 reviews and over 100 units bought in the past month. The DST-210 sits at 4.0 out of 5 stars from just 19 reviews, which tells me it’s newer to the market and hasn’t been as widely tested by users yet. Based on the review volume alone, I’d trust the DST-201’s track record more, but the DST-210’s specs are objectively better for serious repair work.
My Final Verdict
I’m giving the win to the FNIRSI DST-210 because its 48MS/s sampling rate and 10MHz bandwidth are simply in a different league for actual repair work — you can catch signal details the DST-201’s 5MSa/s and 1MHz bandwidth will completely miss. The DST-201 is still a solid runner-up for anyone who needs that dedicated DDS signal generator with 13 waveforms up to 10KHz and a lighter 0.66-pound tool for field diagnostics where portability and waveform simulation matter more than raw scope performance.
If you’re on the fence, ask yourself this: are you mostly testing audio circuits and sensors, or are you troubleshooting digital signals and switching power supplies? For the latter, the DST-210’s faster sampling will save you from chasing ghosts — that’s the decision maker right there.
Winner: FNRSI Upgraded DST-210 2-in-1
- 【2-in-1 Precision Instrument: Oscilloscope & Multimeter】The DST...
- 【High-Speed 48MS/s Sampling & Vivid 2.8" Display】Experience clear and...
- 【Built-in 13-Waveform Signal Generator & Data Logger】Generate...
Best for repair techs who need real oscilloscope performance with 48MS/s sampling and 10MHz bandwidth for digital circuit diagnostics. The faster sampling alone makes this the smarter buy for serious troubleshooting.
Runner-Up: FNIRSI DST-201 3IN1
- 【19,999 TRMS 3-in-1 Digital Multimeter】FNIRSI DST-201 supports curve...
- 【Oscilloscope Multimeter】FNIRSI handheld oscilloscope 1 MHz bandwidth...
- 【DDS Signal Generator】DDS signal generator outputs 13 waveforms up to...
Best for field techs who value the 3-in-1 design with a dedicated DDS signal generator, temperature probe, and lighter 0.66-pound weight. Choose this if waveform simulation and portability matter more than raw scope speed.
As an Amazon Associate I earn from qualifying purchases at no extra cost to you.