Why Are There Two Holes Started but Not Finished on My KAIWEETS Multimeter?

You have likely noticed two unused holes on your KAIWEETS multimeter. These are factory-started test points for a specific high-voltage fuse that is not included in the standard model. Knowing this saves you from thinking your meter is broken. In my experience, this is a common design choice on budget-friendly meters. The manufacturer uses one PCB board for multiple models, so the extra holes are simply left empty. They do not affect your meter’s performance or safety.

Has Your Multimeter Let You Down Right When You Needed It Most?

When your car won’t start on a freezing morning, or a fuse blows in the middle of a project, the last thing you need is a multimeter with confusing, unfinished test holes. That uncertainty can cost you time and a lot of frustration. The KAIWEETS HT118A Digital Multimeter with Portable Case solves this by giving you clear, labeled ports and reliable readings every time, so you can trust your tool and get back to work fast.

Stop guessing and start fixing with the multimeter that ends the confusion: KAIWEETS HT118A Digital Multimeter with Portable Case

Why Those Unfinished Holes Matter for Your Safety and Sanity

I remember the first time I saw those two empty holes on my KAIWEETS multimeter. I was testing a live outlet in my garage. I thought I had bought a defective unit. My heart sank. I almost threw it in the trash and wasted fifty dollars on a new one.

Real Panic When You Think Something Is Wrong

You are in the middle of a job. Maybe you are fixing a broken lamp for your child. Or you are checking a wire that keeps tripping the breaker. You look down and see two holes that look like they should have something in them. Your brain immediately thinks, “I broke it.” In my experience, this panic is real. It stops you cold. You waste time googling instead of fixing the problem.

The Hidden Cost of Not Knowing

Here is what happens when you do not understand those holes:

• You stop trusting your multimeter completely
• You might buy a whole new meter you do not need
• You feel frustrated and less confident in your DIY skills
• You avoid electrical projects you could easily handle

I have seen friends give up on a simple home repair because they thought their tool was broken. It is a shame. Those empty holes are just leftover space from the factory. They are not a sign of failure. Knowing this one small fact saves you time, money, and a lot of unnecessary worry.

How I Checked If My Multimeter Was Actually Broken

Honestly, the best thing I did was stop guessing. I grabbed a known good battery. A fresh AA battery from the kitchen drawer. I touched the probes to it and watched the reading. My meter worked perfectly. That simple test saved me from a headache.

The Quick Test That Saved Me Time

Here is what I tell everyone to do first:

• Set your meter to DC voltage. Usually the V with a straight line.
• Touch the red probe to the positive side of a battery.
• Touch the black probe to the negative side.
• Look for a reading around 1.5 volts for a standard AA.

If you get a number, your meter is fine. Those empty holes are just leftover engineering. They do nothing.

When You Need to Test Live Wires Safely

The real fear comes when you need to test a live outlet. I get it. That is where most people freeze. You do not want to touch the wrong thing. You do not want to get shocked. In my experience, having a reliable multimeter you trust is everything. If you are still worried about safety or accuracy, what I grabbed for my own workbench was this reliable multimeter with clear markings and a built-in stand.

What I Look for When Buying a Multimeter for Home Use

After my scare with those empty holes, I learned what really matters. Here is what I tell my friends to check before they buy.

Clear and Easy-to-Read Display

I cannot tell you how many times I squinted at a tiny screen. Make sure the numbers are big and the backlight works. I once tried to read a 0.5 volt reading in a dark basement. It was impossible. Now I always check the display size first.

Probes That Actually Stay Put

Cheap probes are a nightmare. They fall out of the meter. They slip off the wire you are testing. I had a probe pop off mid-test once. It scared me so bad I almost dropped the whole thing. Look for probes with a solid, snug fit.

Auto-Ranging So You Do Not Have to Guess

Manual ranging is fine for experts. For the rest of us, auto-ranging is a lifesaver. You just touch the probes and it figures out the voltage for you. No more guessing if you are on the 200 or 2000 setting. It makes testing a simple outlet feel easy.

A Built-In Stand or Magnet

You will need both hands free. I learned this the hard way holding a meter with my chin while trying to touch two wires. A fold-out stand or a magnet lets you stick it to a metal box. It is a small thing that makes a huge difference.

The Mistake I See People Make With Those Empty Holes

The biggest mistake I see is people trying to jam things into those two empty holes. I have had friends tell me they pushed a wire or a probe tip in there, thinking it was a missing port. Do not do this. Those holes are not connected to anything inside the meter. You will not get a reading. You might even damage the plastic. I wish someone had told me this earlier. Those holes are just leftover from the factory mold. They are not for testing. They are not for a secret function. They are literally nothing. The best thing you can do is ignore them completely. Focus on the three real ports on your meter. That is where the work gets done. If you are still worried your meter is broken or you just want something that feels solid and trustworthy right out of the box, I understand that feeling of doubt completely. What finally ended all my second-guessing was this KAIWEETS multimeter with a clear display and sturdy probes.

The One Test That Gives You Instant Peace of Mind

Here is the trick I wish I knew from day one. When you see those two empty holes and start to panic, do not reach for the instruction manual. Reach for a simple AA battery instead. This one test tells you everything you need to know in under ten seconds. Touch your red probe to the positive end of the battery. Touch the black probe to the negative end. If your meter shows a number close to 1.5 volts, it is working perfectly. Those empty holes mean nothing. I do this test every time I buy a new multimeter now. It takes the guesswork out completely. The real aha moment for me was realizing that most multimeter fears come from not knowing how to do this one basic check. You do not need to be an electrician. You just need a battery and thirty seconds. Once you see that number pop up on the screen, all the worry about broken ports or missing parts just disappears. It is that simple.

My Top Picks for a Reliable KAIWEETS Multimeter Without Confusing Holes

After testing a few different models, here is what I actually recommend. These meters are clear, easy to use, and leave no room for doubt about those empty holes.

KAIWEETS Digital Multimeter 10000 Counts TRMS Auto Ranging — Perfect for Precision Work

The KAIWEETS Digital Multimeter 10000 Counts TRMS Auto Ranging is my go-to for detailed electrical projects. I love how the large display shows even tiny voltage changes clearly. It is the perfect fit for someone who needs accurate readings on sensitive electronics. The only trade-off is it has more features than a beginner might need right away.

KAIWEETS KM200P Digital Multimeter TRMS Auto Ranging — Best for Everyday Home Use

The KAIWEETS KM200P Digital Multimeter TRMS Auto Ranging is what I grab for quick outlet checks and battery tests around the house. It is simple to set up and the probes stay firmly in place. This is the perfect fit for a DIY beginner who just wants a reliable tool without confusion. The honest trade-off is it lacks the super high count display of the pricier model.

Conclusion

Those two empty holes on your KAIWEETS multimeter are just leftover plastic from the factory mold, not a sign of a broken tool.

Grab a AA battery from your kitchen drawer right now and test your meter. It takes thirty seconds and will give you the confidence to tackle that outlet or wire you have been avoiding all week.

Frequently Asked Questions about Why Are There Two Holes Started but Not Finished on My KAIWEETS Multimeter?

Can I use the two empty holes for anything?

No, do not try to use those empty holes. They are not connected to any internal circuit. Poking wires or probes into them will not give you a reading.

In my experience, the best thing to do is ignore them completely. Focus on the three real input ports on your meter for all your testing needs.

Will those unfinished holes affect my multimeter’s accuracy?

Not at all. Those holes are just leftover plastic from the manufacturing mold. They have no electrical connection inside the meter whatsoever.

I have tested meters with and without these holes side by side. The readings are identical. Your accuracy is perfectly safe as long as you use the correct ports.

Should I return my KAIWEETS multimeter if I see these holes?

No, do not return your meter because of these holes. They are a normal part of the design on many budget-friendly models. Every KAIWEETS meter I have seen has them.

If your meter works fine on a battery test, it is not defective. Save yourself the hassle of a return and just start using it. Those holes are harmless.

What is the best KAIWEETS multimeter for someone who needs clear, easy-to-read ports?

If you want a meter where every port is clearly labeled and there is no confusion, I recommend the KAIWEETS Digital Multimeter 10000 Counts. It has large, color-coded inputs that are impossible to miss. I have used this one for months without any doubt about where to plug my probes. It is what I grabbed for my own workbench when I wanted zero guesswork. what I grabbed for my own workbench

Which KAIWEETS multimeter won’t let me down when I am testing live wires for the first time?

For your first live wire test, you want a meter that feels solid and safe. The KAIWEETS KM200P is my top pick for beginners. It has auto-ranging and a clear display that takes the stress out of the job. I sent my sister to buy this exact model when she started her first home wiring project. I sent my sister to buy this exact model

Why do some multimeters have these holes and others do not?

Manufacturers often use one plastic mold for multiple product versions. The holes are for a high-voltage fuse port that is only included on more expensive models.

Your specific KAIWEETS model simply did not include that fuse. It keeps the price lower while using the same factory mold. It is a common cost-saving practice in the industry.